SHOP TOOLS

0-413 LEVER GREASE GUN

DO NOT CONFUSE THESE WITH THE CHEAP MODEL SOLD BY SOME OF MY COMPETITORS.

Made of: Sturdy 18 Gauge Steel Barrel, the casing is knurled for a good grip, you Get A Screw-in, Angled Nozzle With Coupler Tip (provides a tight fit over grease fittings), ALSO HAS A 9” FLEXIBLE HOSE FOR EVEN GREATER ACCESS TO FITTINGS, black Electrostatic Finish, Zinc Die Case Head for HEAVY-DUTY Performance. This lever grease gun by TOOLUX® is designed with a positive displacement cylinder and push-lock pressure-sealing plunger for eliminating trapped air. You may load these grease guns two ways. It will use 14oz. Grease cartridges or it can be bulk loaded. Release the spring-loaded plunger, and the lever action will pump out a smooth delivery of grease to any size Zinc fitting. The full stroke lever action displaces ample grease with optimum pressures. Guaranteed Against Defects in Material and Workmanship!!!

<>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <><lll><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><>

<>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <><lll><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><>

MAGNETIC TRAY & MAGNETIC PICKUP & INSPECTION MIRROR

0-233 MAGNETIC TRAY

EVERYONE CAN USE ONE - - OR TWO. No more misplacing or losing screws, nuts, bolts, washers or other small steel parts when working on cars, trucks, machinery or equipment in the field or in the shop, also handy around the office or at home.

This unit consists of three parts. First part is a powerful 9oz permanent magnet. Second is a thick rubber boot that covers the magnet. Third is a stainless steel dish (6” diameter 1 1/8” deep) mounted to the top of the magnet.

The magnet attaches to any steel surface in any position – right side up or upside down. The rubber boot allows you to attach the magnet without scratching, dinging, or marring any finished surfaces you place it against. The magnetized stainless steel dish keeps all of the small steel parts exactly where you put them – in plain sight at all times.

LIFETIME REPLACEMENT WARRANTY

0-276 MAGNETIC PICKUP & INSPECTION MIRROR

MAGNETIC PICKUP & INSPECTION MIRROR comes in two separate pieces:

An all angle double ball joint telescoping magnetic pick up tool. Powerful permanent magnet, plastic sure grip handle, triple chrome plated and polished. It also telescopes from 7” to 16 ½”. Use the magnetic pickup tool for retrieving nuts, bolts, screws, etc. from those impossible to reach locations.

Also, a large 2” round mirror, double ball jointed for all angle and 360° viewing, plastic sure grip plastic handle, triple chrome plated and polished. It also telescopes from 7” to 16 ½’. Mirror is ideal for use in hard to see tight spaces and to see around corners.

LIFETIME WARRANTY AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP

CHISEL, PUNCH, FILES etc..

0-278 WOOD CHISEL SET

WOOD CHISEL SET: This set consist of 4 pieces - - ¼”, ½”, ¾”, and the large 1” chisel. Chisels are made with durable TOOL STEEL BLADES - - Long lasting handles - - hundreds of uses. A must set for anyone doing any type of work with wood! LIFETIME WARRANTY AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP

1352 PROFESSIONAL 8pc PUNCH AND CHISEL SET

8pc PUNCH AND CHISEL SET: This 8 piece punch and chisel set is designed to withstand the pressures of professional constant use. It is made of the same type of heavy duty steel as impact sockets and has a black pentrate finish. The eight pieces range in length from 8 to 10 inches.

The set consist of:

7/8” cold chisel – 1” cold chisel -- 1 ¼” cold chisel

Center punch -- 3/16” tapered flat punch -- 3/8” tapered flat punch -- 3/8” strait flat punch -- ½” strait flat punch

LIFETIME REPLACEMENT WARRANTY

0-991 12PC JUMBO PUNCH & CHISEL SET

12 pc JUMBO PUNCH & CHISEL SET, SPECIFICATIONS: Manufactured to the highest standards and designed to withstand the constant, punishing usage these tools are put through. Punches are made of HEAVY DUTY CHROME VANADIUM STEEL, DROP FORGED and HEAT TREATED with precision ground and polished blades. Corrosion resistant sandblasted finish on the heavy duty hex stock shanks, supplied with a roll up canvas storage pouch for easy portability CONTENTS:

6 – COLD CHISELS:

½ x 6 ½ (12mm x 165mm) 5/8 x 7/8 (16mm x 175mm)

¾ x 8 (19mm x 200mm) 13/16 x 8 (20mm x 200mm)

7/8 x 10 (22mm x 250mm) 1 x 10 (25mm x 250mm)

3 – TAPER PUNCHES:

1/8 X 6 (3mm x 150mm) ¼ x 7 (6mm x 175mm)

3/8 x 10 (10mm x 250mm)

2 – CENTER PUNCHES:

5/16 x 8 (8mm x 200mm) ¼ x 10 (6mm x 175mm)

1 – PIN PUNCH:

3/8 x 8 (10mm x 200mm)

GUARANTEED AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP

88-04 12pc FILE SET

12 pc FILE SET: This 12 piece Industrial quality file set is designed for the professional. All files are tempered and hardened. The set comes in a handy plastic roll up pouch for easy storage. The set contains 2 wood handles and one each of the following files:

10” BASTARD 2 SAY FILE

8” HALF BASTARD FILE

8” SMALL SAW FILE

8” HALF ROUND WOOD RASP

8” ROUND WOOD RASP

8” ROTARY MOWER

8” SHOE RASP

6” SLIM TAPER TRIANGULAR SAW FILE

6” EXTRA SLIM TAPER SAW FILE

6” ROUND BASTARD FILE

LIFETIME REPLACEMENT WARRANTY

0-463 WIRE WHEEL BRUSH SET – 6PC

WHIRE WHEEL BRUSH SET 6PC: Multipurpose wire wheel brushes with crimped steel wire. Brushes ideal for use with electrical or pneumatic tools. Used on metal surfaces to remove pain, rust, corrosion, etc. Brushes may also be use on concrete surfaces. Each wire wheel brush has a ¼” shank.

Set Includes

1 – 2” cup brush

2 – 1 ½” wire wheel brush

1 – 2” wire wheel brush

1 – 2 ½” wire wheel brush

1 – 3” wire wheel brush

ONE YEAR REPLACEMENT WARRANTY AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP

<>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <><lll><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><>

HYDRAULIC JACKS

ALL BOTTLE JACKS HAVE A ONE YEAR WARRANTY.

STANDARD BOTTLE JACK

STANDARD BOTTLE JACKS: have precision ground pump piston, EXTRA WIDE base for safety, hardened ram, and polished handle included. These jacks can only be used upright or slightly tilted. (30 Ton weighs 52lbs and can only be used in the upright position.) JACKS COME WITH A 1 YEAR WARRANTY

12 TON 20 TON 30 TON

Weight 17lbs 26lbs 52lbs
min height 9 ½” 10” 11 1/2”
ram lift 6 ½” 6 ½” 7”
screw extension 4” 4” none
max extended height 20” 20 ½” 18 ½”

w/ screw extension

0-133 12 TON

0-318 30 TON

LOW PROFILE BOTTLE JACK

0-329 12 TON 0-330 20 TON

LOW-PROFILE BOTTLE JACKS: have precision ground pump piston, EXTRA WIDE base for safety, hardened ram, and a compact 3 piece handle included. These jacks can only be used upright or slightly tilted. JACKS COME WITH A 1 YEAR WARRANTY

12 TON 20 TON

weight 14lbs 22lbs
min height 6 ¾’” 7 ½””
ram lift 3 ½” 4”
screw extension 1 ¾” 2 ¾”
max extended height 12” 14 ¼”

w/ screw extension

0-843 AIR / HYDRAULIC BOTTLE JACK – 20 TON

20 TON AIR OR HYDRAULIC BOTTLE JACK, ideal for, maintenance shops, heavy duty trucks, and other industrial heavy lifting. Air / Hydraulic bottle jacks are designed for operating EITHER manually OR pneumatically. They are lightweight for easy portability into the field. When time is money, Air / Hydraulic bottle jacks are faster and easier than using conventional hand operated jacks. THIS JACK CAN ONLY BE USE UPRIGHT OR SLIGHTLY TILTED (5° MAX).

COMPLIES WITH APPLICABLE ASME/ANSI STANDARDS; ONE YEAR WARRANTY

FEATURES AND SPECS:

Total weight 37 lbs
Minimum height 10 3/8”
Ram Lift 6 5/8”
Screw extension 3”
Maximum height 20” (with screw fully extended 3”)
Psi rating 120 min. to 200 max
Air valve and inlet ¼” x 18 npt
Air hose length 40” (swivel type for ease of use)
Base dimensions 8 ¾” x 5 ¼”
2 pc handle length 18”
Saddle diameter 1 ¾” (cross groove style)
“D” handle attached to side of jack body for easy carrying

<>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <>< <><lll><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><> ><>

SOLID STEEL BENCH VICE

SOLID STEEL BENCH VISE TOUGH ENOUGH TO OUTLAST BOTH OF US. These solid steel bench vices are no joke. When I say solid, I mean solid. The 6” bench vice weighs 32lbs and the 8” bench vice is 45lbs. DON’T WORRY; I’LL COVER ALL YOUR SHIPPING COST ON THIS ONE TOO!!! Designed for the professional user this is an UNBREAKABLE all steel body, NOT CAST!!! Either vice is equipped with permanent pipe jaws as well as the standard straight jaws. They also come with a large polished anvil so you can beat the hell out of it when you need to. Supplied with a 360-degree swivel base and has a positive locking mechanism. The 6” vise has a 6” jaw opening a 3” throat depth and weighs 32lbs; the 8” vise has a 8” jaw opening, a 3 ½” throat depth and weighs 45lbs. EACH VISE IS BACKED WITH A 10 YEAR WARRANTY AGAINST DEFECTS IN MATERIAL OR WORKMANSHIP!!!!!

0-334 6”

0-335 8”

0-833 3 Jaw Gear Pullers – 4 PC Set

This is a complete set of gear and bearing pullers. You get the 3”, 4”, 6”, and the 8” puller in one set. The Gear Pullers are reversible allowing you to use them for inside gears or clamped over the outside of the gear. They have:

Raised jaw panels for extra strength
A hex head for easy turning
You get a full range from 3” which can be use as a bearing puller to the big 8” which open up to cover a 17” gear
They can be adjusted longer or shorter
They have a depth reach form 2 ¾” to 10 ½”

These are rugged and really can take a beating. They are heat treated and hardened to withstand enormous pressure without that center post pulling out. These are fine thread posts and precisely aligned to give you a positive and equal pull. LIFETIME REPLACEMENT WARANTY

89-75 B & F Repair Kit – 4 ton

B & F REPAIR KIT, this Is a Professional Quality body and frame repair kit. It is a PUSH UNIT ONLY. It is Not a Push-Pull unit. These are made by Wisdom® tools. Users of this unit include truck repair, ships, welders, fabricators, farmers, ranches, Implement Repair, Oilfield, Machinery Movers, contractors, and Waste Haulers. This unit features a pump unit with rubber flame resistant hose (6’) with a 5000 psi working pressure and double base feet to protect valves and provide pumping stability. The pump unit works either horizontally or vertically as long as the hose is at the lover end of the pump. This new type unit requires no threading of the parts and attachments. All attachments feature slip on fittings. Just push on the tubing or fittings and you are ready to go! Other than the pump with hose and 4 ton ram unit accessories include extension tubes of 3 ¼”, 5”, 8 ½”, 16 ½”, and 19 ½”. Also a serrated saddle, 2 ¾” rubber head, rubber faced flat base, spreader ram toe, spreader plunger toe, wedge head, 90° V-base, and a 1000 lb spreader (duck bill). All of this comes in a heavy duty impact resistant plastic carrying case. 18 MONTH WARRANTY

Chain Hoist

These are heavy duty units designed to provide the proper balance of durability and easy, safe, efficient operation. The hand wheel, positive ratchet, and brake are enclosed to keep dirt, dust and grime out of the mechanism. Users include construction sites, mines, farms, factories, docks, and warehouses. ONE TON = 22lb; TWO TON = 57lb, FULLY BACKED WITH A TWO YEAR WARRANTY

Features: